Support

For any technical questions or installation assistance, feel free to contact our support team

Home  >  Support

Acoustic Panel

Prepare the Surface:

1.  Ensure that the wall or ceiling surface where the Akupanel will be installed is smooth, dry, and free of dust, dirt, or any debris. The surface should also be level to ensure that the panels are properly aligned.
2. If the surface is not smooth or has irregularities, we recommend sanding it down or applying a leveling compound to achieve a flat surface.

Measure and Plan the Layout:

1.Measure the area to determine how many panels are required for the space. Plan the panel arrangement and layout before starting the installation.
2.Mark the locations of the panels on the wall or ceiling with a pencil or chalk line to ensure even spacing. Consider the orientation of the panels (e.g., vertical or horizontal) depending on your design preference.

Cutting the Panels (if necessary):

1.Akupanel panels are made from natural wood or MDF, which can be cut using a circular saw or jigsaw. Always measure and mark the panels before cutting to ensure the pieces fit correctly.
2.Wear protective gloves, safety goggles, and a dust mask when cutting the panels to avoid injury and inhalation of dust.

Apply Adhesive:

1.Apply a strong adhesive, specifically designed for acoustic panel installation, to the back of each panel. For best results, use a notched trowel or apply the adhesive in a zigzag pattern to ensure even coverage.
2.Alternatively, for ceiling or larger installations, screws or nails can be used to secure the panels.

Install the Panels:

1.Press the panel firmly against the wall or ceiling where you have marked the positions. For wall installations, start from the bottom and work your way up, ensuring that each panel is level.
2.Align each panel carefully, and use a spirit level or laser level to ensure they are straight and evenly spaced.
3.For ceiling installations, a second person may be helpful to hold the panels in place while securing them.

Use Spacers (if necessary):

1.If required, use spacers to maintain a consistent gap between the panels for a uniform look and to allow for expansion and contraction of the material.
2.After installing the first row, continue with the remaining panels, ensuring each is properly aligned with the ones before it.

Finishing the Edges:

1.Once the panels are installed, cover any exposed edges with trim or moulding for a clean, professional finish. Depending on your aesthetic preference, you can use wood trim or metal strips for added style.

Allow for Curing:

1.If adhesive is used, allow the panels to set for at least 24 hours to ensure a secure bond with the surface. Ensure that the room is well-ventilated during the curing process to speed up drying time.

Regular Cleaning:

1.Dust the panels regularly using a soft, dry cloth or microfiber duster to remove dust and dirt. For stubborn dirt, lightly vacuum the panels using a soft brush attachment or use a handheld vacuum with a low suction setting.
2.Avoid using abrasive cleaning tools or harsh chemicals, as these can damage the wood or MDF finish.

Deep Cleaning:

1.For more thorough cleaning, use a damp cloth with mild soap or wood-safe cleaner. Gently wipe down the panels, being careful not to soak them. Excess moisture can damage the material, especially if it’s made of MDF or untreated wood.
2.For wood panels, use a wood polish or conditioner to maintain the wood’s natural shine and to prevent it from drying out over time.

Avoid Excessive Moisture:

1.While acoustic panels are designed for interior use, they should not be exposed to excessive moisture or humidity, as this can warp or damage the panels.
2.In areas with high humidity, consider using a dehumidifier to keep moisture levels low.

Avoid Direct Sunlight:

1.UV exposure can cause discoloration or fading over time. If the panels are installed in areas with direct sunlight, consider using curtains or blinds to protect the panels from prolonged sun exposure.

Prevent Physical Damage:

1.Avoid using sharp objects or heavy items that could cause scratches or dents in the surface of the panels. If the panels are located in high-traffic areas, consider placing protective mats or rugs in front of them to prevent accidental damage.

Repainting or Refinishing:

1.If the panels start to show wear or you wish to change their appearance, consider refinishing or repainting them. If the panels are painted, use a high-quality paint that is suitable for wood or MDF.
2.Follow the manufacturer’s instructions for repainting or refinishing to ensure optimal results.

What are Akupanel acoustic panels made of?
1.Akupanel panels are typically made from a combination of MDF (Medium Density Fiberboard) and wood veneer or other acoustic material. The panels are designed to provide both aesthetic appeal and soundproofing qualities.

How do I install Akupanel acoustic panels?
1.Akupanel panels are easy to install. They can be adhered to the wall or ceiling using a strong adhesive or secured with screws. Always ensure that the surface is smooth, clean, and level before installation. Follow the detailed installation instructions for best results.

Can I install Akupanel panels on any wall surface?
1.Yes, Akupanel panels can be installed on most wall surfaces, including drywall, plaster, and concrete. For optimal results, ensure that the surface is level and free from dust or moisture.

Do Akupanel panels help with soundproofing?
1.Yes, Akupanel panels are designed to absorb sound and reduce noise levels, making them ideal for use in home theaters, offices, and other environments where sound quality is important.

How do I clean Akupanel acoustic panels?
1.For regular cleaning, dust the panels with a soft cloth or use a vacuum with a brush attachment. For deep cleaning, use a damp cloth with a mild soap solution and avoid soaking the panels. Never use harsh chemicals or abrasive cleaners.

Can I repaint or refinish Akupanel panels?
1.Yes, you can repaint or refinish Akupanel panels if needed. If the panels are wood veneer, use a wood-safe paint or stain. Always follow the manufacturer’s recommendations for refinishing to maintain the integrity of the material.

Are Akupanel panels suitable for high-humidity areas?
1.Akupanel panels are designed for interior use and should not be exposed to excessive moisture or humidity, which could cause the panels to warp or swell. Ensure proper ventilation in bathrooms or kitchens if installing panels in these areas.

Download important resources related to Akupanel acoustic panels:

WPC Wall Panel

Prepare the Surface:

1.Ensure the wall surface is clean, dry, and smooth. If the surface has any moisture, mold, or paint peeling off, it should be addressed before proceeding.
2.For drywall or plaster surfaces, use adhesive or nails/screws suitable for the material.
3.For concrete or masonry surfaces, apply an appropriate primer for better adhesion.

Measure and Plan the Layout:

1.Measure the wall and mark a level line where the first panel will be placed. Use a laser level or a traditional spirit level to ensure accuracy.
2.If using patterned or decorative WPC wall panels, plan the layout to ensure symmetry.

Cut the Panels:

1.WPC wall panels are easy to cut using a standard saw. Measure and mark the panels for accurate cutting.
2.When cutting the panels, wear protective goggles and gloves to avoid injuries.

Apply Adhesive (if applicable):

1.Apply a high-quality adhesive designed for WPC to the back of the panel or directly to the wall.
2.For panels with tongue-and-groove installation, apply adhesive in the groove to ensure a secure fit.

Install the Panels:

1.Start from the bottom of the wall and work your way up. Attach the first panel to the marked line and secure it with nails, screws, or adhesive (depending on your chosen installation method).
2.If using the tongue-and-groove system, fit the panels together by sliding them into place. Ensure they align properly.

Secure the Panels:

1.Use a level to ensure that each panel is straight. Secure the panels firmly to the wall with nails, screws, or adhesive as necessary.
2.For heavy-duty installation, especially for commercial spaces, additional fastening may be required.

Finishing Touches:

1.Once all panels are installed, cover any seams or gaps with corner trims or edge strips to give the wall a clean, professional look.
2.Allow the panels to set and dry if adhesive was used.

Regular Cleaning:

1.WPC wall panels are easy to clean. Use a soft cloth or sponge and a mild cleaning solution (water mixed with a small amount of dish soap).
2.For stubborn stains, use a gentle, non-abrasive cleaner and a soft-bristled brush to avoid scratching the surface.

Avoid Harsh Chemicals:

1.Avoid harsh chemicals or abrasive cleaning tools that could damage the finish of the panels.
2.Never use bleach or ammonia-based products as they may cause discoloration.

Protect Against Moisture:

1.Although WPC panels are water-resistant, avoid prolonged exposure to excessive moisture. Wipe up spills immediately to prevent water from seeping into seams or edges.

Prevent Damage from Impact:

1.WPC wall panels are durable, but heavy impacts could dent or scratch them. Protect the panels from sharp objects or heavy impacts by using corner guards if needed.

Periodic Inspection:

1.Periodically check the panels for any signs of wear, especially in high-traffic areas. If any sections of the panels become loose, re-secure them as necessary.

Avoid Direct Heat Exposure:

1.Avoid placing hot objects like pots or heat sources directly against the panels, as this could warp or discolor the material.

How do I install WPC wall panels?
1.Follow the step-by-step instructions provided in the “Installation Instructions” section. Ensure the surface is clean, dry, and smooth before starting the installation process.

Can WPC panels be used in bathrooms or wet areas?
1.Yes, WPC panels are water-resistant and can be used in bathrooms and other wet areas. However, avoid direct, prolonged exposure to standing water.

Are WPC panels suitable for outdoor use?
1.WPC panels are designed for indoor use. While they are water-resistant, they are not suitable for direct outdoor exposure to extreme weather conditions like rain, snow, or direct sunlight.

Can I cut WPC panels to fit my space?
1.Yes, WPC panels can be easily cut using a saw. Make sure to measure and mark the panels before cutting for precise installation.

What should I do if my panels are damaged?
1.If your panels are damaged during installation or due to manufacturing defects, please contact our support team. Depending on the situation, we may offer a replacement or assistance with repairs.

How do I clean WPC wall panels?
1.WPC panels are easy to clean. Simply use a mild soap solution and a soft cloth or sponge. Avoid using harsh chemicals, abrasives, or cleaners that can damage the surface.

Do I need to seal the edges of the panels after installation?
1.While WPC panels are water-resistant, sealing the edges with silicone caulk or trim can help ensure a more finished and protected look.

Here, you can download all the important documents related to WPC Wall Panels:

SPC Flooring

Prepare the Subfloor:

1.Ensure the subfloor is dry, clean, level, and free from dust, debris, and moisture. Remove any old flooring if necessary.
2.For concrete subfloors, ensure there is no moisture buildup, and use a moisture barrier if required.
3.For wooden subfloors, make sure there is no movement, and they are level.

Acclimatize the Flooring:

1.Allow the SPC flooring planks to acclimate in the room where they will be installed for at least 24-48 hours before installation. The room temperature should be between 18°C and 25°C (64°F and 77°F).
2.Lay the planks flat and allow them to adjust to the ambient temperature to prevent expansion or contraction after installation.

Plan the Layout:

1.Before installing, measure the room and determine the layout. Start the installation from the center or left corner of the room, depending on the design preference.
2.Use spacers to maintain a gap of about 5-10 mm between the flooring and the walls to allow for expansion.

Install the First Row:

1.Begin by laying the first row of planks, making sure to stagger the seams for a natural appearance. Use the tongue-and-groove method or click-lock system for easy installation.
2.For planks with a click-lock system, simply insert the tongue into the groove at a slight angle and press down until the plank locks into place.

Continue Installation:

1.Continue installing the remaining planks row by row, ensuring the edges fit tightly together. Use a tapping block and a rubber mallet to gently tap the edges of the planks into place, making sure there are no gaps between them.
2.If necessary, use a pull bar to tighten the seams near the walls.

Cutting the Planks:

1.When you reach the final row or edges of the room, you may need to cut the planks to fit. Use a saw or a utility knife to cut the planks to the required size.
2.Always measure twice before cutting to ensure accuracy.

Install Transition Strips:

1.After all the planks are installed, cover any gaps along the edges of the room with transition strips or baseboards to give the floor a finished look.

Allow for Expansion:

1.After installation, allow the floor to set for 24-48 hours before heavy use to ensure that the planks have fully adjusted to the room’s temperature and humidity.

Regular Cleaning:

1.Sweep or vacuum the SPC floor regularly to remove dust, dirt, and debris that could scratch the surface.
2.For more thorough cleaning, use a damp mop with warm water and a mild floor cleaner designed for vinyl flooring. Avoid using excessive water, as this can seep into the seams and cause damage.

Avoid Harsh Chemicals:

1.Do not use wax-based, oil-based, or abrasive cleaners, as they can damage the floor’s surface and leave a residue.
2.Avoid using ammonia, bleach, or solvent-based cleaners as they can discolor or damage the coating of the floor.

Protect the Flooring:

1.Place doormats at entrances to prevent dirt, sand, or grit from being tracked onto the floor.
2.Use furniture pads or felt protectors on the legs of chairs and tables to prevent scratching.

Prevent Sun Damage:

1.While SPC flooring is UV-resistant, prolonged exposure to direct sunlight can cause the floor to fade. Use curtains or blinds to protect the flooring from extended sunlight.

Moisture Protection:

1.While SPC flooring is water-resistant, it is not waterproof. Wipe up any spills immediately to prevent moisture from getting into the seams.
2.Ensure that any areas prone to water (like bathrooms or kitchens) are properly ventilated.

Resealing (If Applicable):

1.In areas of high foot traffic or commercial spaces, you may need to reseal the flooring after several years of use to maintain its protective layer and shine. Consult the manufacturer for specific recommendations on sealing products.

What is SPC flooring?
1.SPC (Stone Plastic Composite) flooring is a type of vinyl flooring that is known for its durability, water resistance, and ease of installation. It has a stone composite core, which makes it stronger and more rigid than traditional vinyl flooring.

Can SPC flooring be installed over existing floors?
1.Yes, SPC flooring can often be installed over existing floors like concrete, wood, or tile, as long as the surface is smooth, clean, and level. However, make sure to check the manufacturer’s guidelines for specific recommendations.

Can SPC flooring be used in bathrooms or kitchens?
1.Yes, SPC flooring is water-resistant, making it a great option for moisture-prone areas such as bathrooms and kitchens. However, ensure the seams are properly sealed to avoid moisture penetration.

How do I clean and maintain SPC flooring?
1.Clean SPC flooring with a soft broom, vacuum, or damp mop. Avoid harsh chemicals or abrasive cleaners, and always dry the floor after cleaning to prevent water damage.

Can SPC flooring be repaired if damaged?
1.In most cases, if a plank is damaged, it can be replaced without having to replace the entire floor. Contact customer service for guidance on replacing planks.

Is SPC flooring suitable for commercial use?
1.Yes, SPC flooring is durable enough for light to medium commercial use. However, for high-traffic areas, you may need to select a product with a thicker wear layer or commercial-grade SPC.

How long does SPC flooring last?
1.With proper care and maintenance, SPC flooring can last anywhere from 10 to 30 years, depending on the quality of the product and the level of foot traffic.

Download important documents for SPC Flooring:

UV Marble Sheet

Prepare the Surface:

1.Ensure that the surface where the UV Marble Sheet will be applied is smooth, clean, dry, and free of dust, dirt, oil, or grease. Use a mild detergent to clean the surface and let it dry thoroughly.
2.For walls, make sure the surface is flat and level. For floors, check for any moisture or uneven areas that may need correction.

Measure and Plan the Layout:

1.Measure the area to determine how many sheets you need. Plan the layout to minimize cuts and ensure symmetry, especially if the sheets have patterns or veins that need to align.
2.Use a pencil or chalk to mark lines where the edges of the UV Marble Sheets will be placed. This ensures accurate placement and alignment.

Cutting the Sheets (if necessary):

1.UV Marble Sheets are easy to cut using a standard utility knife or a circular saw with a fine-toothed blade. Measure and mark the sheet before cutting.
2.Wear protective gloves and goggles when cutting to ensure safety.

Apply Adhesive:

1.Use a high-quality adhesive or bonding agent suitable for UV Marble Sheets. Apply the adhesive to the back of the sheet or directly to the wall or floor, depending on the installation method.
2.Spread the adhesive evenly with a notched trowel for a smooth and consistent coverage.

Install the Sheets:

1.Press the UV Marble Sheet onto the prepared surface, starting from one corner. For walls, begin at the bottom and work upwards, ensuring the sheet is level and aligned.
2.Use spacers (if necessary) to maintain consistent gaps between sheets for grout or sealing.
3.Press down firmly to ensure good adhesion, and use a roller or flat tool to remove any air bubbles or gaps between the sheet and surface.

Grouting (if applicable):

1.If using UV Marble Sheets on floors or with gaps between sheets, apply grout between the joints after the adhesive has set. Use a grout float to spread the grout and fill the gaps.
2.Wipe off any excess grout with a damp cloth, and allow the grout to cure according to manufacturer recommendations.

Finishing Touches:

1.After installation, clean the surface and remove any adhesive or grout residue.
2.Install edge trims or finishing strips around the edges of the UV Marble Sheets for a professional and clean look.

Curing Time:

1.Allow the adhesive and grout (if used) to fully cure according to the product specifications before subjecting the installation to moisture or heavy use. This is typically 24-48 hours.

Regular Cleaning:

1.Clean UV Marble Sheets with a soft, damp cloth and a mild, non-abrasive cleaner. Avoid using harsh chemicals or abrasive materials that could damage the surface.
2.For routine cleaning, simply wipe down the surface with warm water and a gentle dish soap solution.

Removing Stains:

1.For stubborn stains, use a non-abrasive cleaner or a mixture of baking soda and water. Apply the mixture to the stained area and gently scrub with a soft cloth or sponge.
2.Avoid using acidic cleaners like vinegar or bleach, as they can damage the sheet’s surface.

Prevent Scratches:

1.Although UV Marble Sheets are durable, they can still be scratched by sharp objects. Use placemats, coasters, or cutting boards when placing items on the surface.
2.Avoid dragging heavy furniture or appliances across the surface.

Avoid Excessive Heat:

1.Do not place hot objects, such as pots or pans, directly on the UV Marble Sheets, as high heat can damage the surface.
2.Use trivets or hot pads to protect the surface from heat exposure.

Surface Protection:

1.To protect the surface from scratches and wear, you may consider applying a protective polish designed for marble or similar surfaces. Be sure to follow the manufacturer’s instructions.

Moisture Protection:

1.UV Marble Sheets are water-resistant, but excessive moisture can still seep into seams. Ensure that the sheets are properly sealed, especially in wet areas like bathrooms or kitchens.

What are UV Marble Sheets?
1.UV Marble Sheets are high-quality decorative sheets made from a blend of natural marble and UV-cured resin, offering a realistic marble look without the weight or expense of actual marble. They are durable, water-resistant, and easy to install.

Can UV Marble Sheets be used for both walls and floors?
1.Yes, UV Marble Sheets are versatile and can be used on both walls and floors. However, for flooring applications, ensure the surface is level and the sheets are securely adhered to prevent movement.

How do I clean UV Marble Sheets?
1.UV Marble Sheets are easy to clean. Use a damp cloth and mild soap or non-abrasive cleaner to wipe down the surface. Avoid harsh chemicals or abrasive scrubbers that could scratch the finish.

Can UV Marble Sheets be used in wet areas like bathrooms?
1.Yes, UV Marble Sheets are water-resistant and ideal for wet areas like bathrooms, kitchens, and laundry rooms. However, make sure that edges and seams are properly sealed to prevent moisture from seeping into the underlying surface.

Are UV Marble Sheets heat-resistant?
1.UV Marble Sheets are resistant to heat but should not be exposed to high temperatures directly. Use trivets or protective mats under hot objects like pots and pans to avoid potential damage.

Can I install UV Marble Sheets myself, or do I need a professional?
1.UV Marble Sheets are designed for easy installation, and many customers can install them themselves. However, if you are unsure, or if the installation is complex (e.g., large commercial spaces), consider hiring a professional installer.

How long do UV Marble Sheets last?
1.With proper care and maintenance, UV Marble Sheets can last for many years. They are designed to be durable and resistant to common forms of wear and tear, including fading and cracking.

Download helpful resources related to UV Marble Sheets:

PU Stone Panel

Introduction:

PU Stone Panels are a lightweight and easy-to-install alternative to traditional stone materials. With their realistic stone appearance and smooth surface, they are ideal for both residential and commercial applications, including walls, backsplashes, and feature areas. These panels are easy to install, requiring only basic tools and adhesive.

Required Tools:
  • Measuring tape
  • Level
  • Power drill and screws (for mounting, if needed)
  • Adhesive (construction adhesive, PU adhesive, or other recommended adhesive)
  • Notched trowel (for adhesive application)
  • Utility knife or saw (for cutting panels)
  • Safety gloves and goggles
Step-by-Step Installation:

1.Prepare the Surface:
Ⅰ.Ensure the surface where the panels will be applied is clean, dry, and smooth. Remove any dust, dirt, or debris. If needed, sand down rough areas for a smooth finish. Ensure that the surface is level.
2.Measure and Plan Layout:
Ⅰ.Measure the area to be covered and mark a reference line on the wall to ensure the panels are installed straight and level. Plan the layout to minimize the need for trimming and ensure a symmetrical look.
3.Cut Panels (if necessary):
Ⅰ.Using a utility knife or saw, measure and cut the panels to fit around corners or edges. Always make sure to measure accurately to avoid cutting too much off. Cut panels from the back side for a clean edge.
4.Apply Adhesive:
Ⅰ.Using a notched trowel, apply a thin, even layer of adhesive to the back of each panel or directly to the wall. Make sure to follow the adhesive manufacturer’s recommendations.
5.Install the Panel:
Ⅰ.Start from one corner of the wall, press the panel firmly into place. Make sure it is aligned with the reference line. Apply pressure to ensure a secure bond. If needed, use a rubber mallet to tap the panels into place.
6.Continue Installing Panels:
ⅠProceed with the installation of subsequent panels. Ensure the edges are aligned and there are no visible gaps between the panels. Use spacers if required for consistent gaps.
7.Finishing:
Ⅰ.Once all panels are installed, clean up any excess adhesive immediately with a damp cloth. Allow the adhesive to cure for 24-48 hours (follow the adhesive manufacturer’s instructions).

Safety Tips:
  • Always wear gloves and goggles when cutting the panels.
  • Work in a well-ventilated area, especially when using adhesives.
  • Handle the panels with care to avoid any accidental drops.
Routine Cleaning:

1.Use a soft, microfiber cloth to regularly wipe away dust and dirt.
2.For light cleaning, use warm water with a mild detergent and a soft cloth to clean the surface. Avoid harsh chemicals or abrasive cleaners as they can damage the finish of the panels.
3.For more stubborn stains, use a non-abrasive cleaner specifically designed for polyurethane surfaces, and gently scrub the surface.

Preventive Maintenance:

1.Avoid Scratching: While PU Stone Panels are durable, avoid dragging furniture or heavy objects across the surface. Use felt pads or rubber protectors under furniture.
2.UV Protection: Although UV-protected, the panels can still fade if exposed to direct, prolonged sunlight. Where possible, limit exposure to direct sunlight or use curtains or blinds to protect the panels.
3.Moisture Control: While the panels are moisture-resistant, avoid allowing standing water or excessive moisture to remain on the panels for extended periods. Wipe up spills immediately.

General Care:

1.Regularly check the panels to ensure there are no loose edges. If any panels are coming loose, reapply adhesive or consult a professional installer.
2.Clean the panels at least once every month to maintain their aesthetic appearance and prevent the build-up of grime.

What are PU Stone Panels made from?
PU Stone Panels are made from high-density polyurethane foam with a stone-like texture, offering the aesthetic look of natural stone but at a much lighter weight and lower cost. They are designed for interior use, providing a realistic stone appearance without the weight or installation complexity of natural stone.

Can I use PU Stone Panels outdoors?
PU Stone Panels are designed primarily for indoor use. While they can be used in certain outdoor conditions (e.g., covered patios or sheltered areas), prolonged exposure to harsh weather (rain, snow, direct sunlight) may cause damage over time. For outdoor applications, please consult the manufacturer for specific recommendations.

How do I cut PU Stone Panels?
PU Stone Panels can be easily cut with a utility knife or saw. If you need to cut the panels for edges, corners, or custom-sized areas, use a sharp utility knife for small adjustments or a saw for larger cuts. Always measure carefully before cutting to avoid mistakes.

Are PU Stone Panels waterproof?
Yes, PU Stone Panels are moisture-resistant and suitable for installation in kitchens, bathrooms, and other areas with high humidity. However, they are not fully waterproof, so standing water should be avoided.

How long do PU Stone Panels last?
With proper installation and maintenance, PU Stone Panels can last for many years. Their durability and resistance to fading make them a long-lasting and cost-effective solution for interior decoration.

Can PU Stone Panels be installed over existing walls?
Yes, PU Stone Panels can be installed over most existing surfaces, such as drywall, plaster, or even old stone walls, as long as the surface is clean, dry, and smooth. Ensure the surface is level before applying adhesive.

Can I install PU Stone Panels by myself?
Yes, PU Stone Panels are designed for DIY installation. With the right tools and a little preparation, you can easily install them yourself. However, if you’re unsure about the installation process, consider hiring a professional installer.

Download helpful resources related to PU Stone Panels:

PS Wall Panel

Introduction:

PS Wall Panels are a cost-effective and stylish solution for interior decoration. Made from high-quality polystyrene material, these panels are lightweight, easy to install, and provide a modern look that suits both residential and commercial spaces. Follow the step-by-step guide below for a smooth installation.

Required Tools:
  • Measuring tape
  • Level
  • Power drill (if drilling required)
  • Adhesive (construction adhesive or other recommended adhesive for PS panels)
  • Notched trowel (for adhesive application)
  • Utility knife or saw (for cutting panels)
  • Safety gloves and goggles
  • Spacers (optional, for consistent gaps)
Step-by-Step Installation:

1.Prepare the Surface:
Ⅰ.Ensure the installation surface is clean, dry, smooth, and free from dust or grease. If the surface is uneven, smooth it out before installing the panels. The cleaner and smoother the surface, the better the adhesive bond will be.
2.Measure and Plan Layout:
Ⅰ.Measure the wall area carefully, ensuring to plan your layout and orientation (vertical or horizontal). Mark a level reference line at the starting point to ensure your panels will be installed straight.
3.Cut Panels (if necessary):
Ⅰ.If you need to trim the panels to fit the area, measure carefully and use a utility knife or saw to cut them to the correct size. Always make sure to cut the panels from the back for clean edges.
4.Apply Adhesive:
Ⅰ.Apply a generous layer of adhesive on the back of the panel using a notched trowel. Alternatively, you can apply adhesive directly to the wall, depending on your preference. Be sure to use an adhesive that is suitable for polystyrene (PS) panels.
5.Install the First Panel:
Ⅰ.Starting from the reference line, press the first panel firmly against the wall. Ensure it is level and aligned with your reference line. If needed, use spacers between panels to maintain consistent gaps.
6.Continue Installation:
Ⅰ.Apply adhesive to the back of the next panel and place it next to the first one. Press firmly and ensure it’s aligned. Continue this process until the entire area is covered.
7.Finishing:
Ⅰ.After the panels are in place, wipe away any excess adhesive immediately with a damp cloth. Allow the adhesive to cure according to the manufacturer’s instructions, usually 24-48 hours.

Safety Tips:
  • Wear safety gloves and goggles when cutting the panels.
  • Ensure proper ventilation when working with adhesives.
  • Handle the panels carefully to avoid dropping them and causing damage.
Routine Cleaning:

1.Dust and dirt can be easily removed using a dry microfiber cloth or a soft brush. For regular cleaning, use a damp cloth with warm water and a mild detergent. Avoid harsh cleaning products, as they may damage the finish.
2.For deeper cleaning, use a non-abrasive cleaner designed for polystyrene surfaces. Gently scrub the surface with a soft sponge or cloth and rinse with water.

Preventive Care:

1.Avoid Scratching: PS Wall Panels are lightweight but can be scratched if handled roughly. Use felt pads or rubber protectors under furniture or other objects that could scratch the surface.
2.UV Protection: PS Wall Panels are resistant to fading, but extended exposure to direct sunlight can cause discoloration. Where possible, minimize direct sunlight exposure, especially in high-traffic areas.

General Maintenance:

1.Inspect the panels periodically for any signs of wear or damage. If any panels become loose or detached, apply additional adhesive to reattach them.
2.Check for any accumulated grime or grease in areas prone to splashes (e.g., kitchen or bathroom) and clean them immediately to prevent staining.

What are PS Wall Panels made of?
PS Wall Panels are made from high-quality polystyrene (PS), a lightweight and durable plastic material. They are designed to mimic the look of stone or other textured finishes, offering a cost-effective solution for interior walls.

Can PS Wall Panels be used outdoors?
PS Wall Panels are primarily designed for indoor use. While they are moisture-resistant, they should not be exposed to extreme weather conditions or direct sunlight for extended periods, as this can lead to fading and material degradation.

Are PS Wall Panels easy to install?
Yes! PS Wall Panels are lightweight and easy to install. With the right tools (adhesive, utility knife, level), you can install them yourself. For complex areas or large projects, we recommend consulting a professional installer.

How do I clean PS Wall Panels?
To clean PS Wall Panels, use a damp cloth with warm water and mild soap. Avoid abrasive sponges or harsh chemicals, as they can damage the surface. Regular dusting with a microfiber cloth will help maintain the panel’s appearance.

Can I cut PS Wall Panels to fit my space?
Yes, PS Wall Panels can be easily cut using a utility knife or saw to fit around corners or edges. Always measure carefully and ensure that cuts are clean and straight to maintain a professional finish.

Are PS Wall Panels resistant to moisture?
Yes, PS Wall Panels are moisture-resistant, making them suitable for use in kitchens, bathrooms, and other areas with high humidity. However, avoid prolonged exposure to water or standing moisture.

How long do PS Wall Panels last?
With proper installation and care, PS Wall Panels can last for many years. They are durable and resistant to wear, but their lifespan may vary based on environmental conditions and maintenance practices.

Can I install PS Wall Panels over existing wallpaper or paint?
Yes, PS Wall Panels can be installed over most existing surfaces, including painted walls, wallpaper, or drywall. Ensure the surface is smooth, clean, and free of any loose materials before installation.

Download helpful resources related to PS Wall Panels:

Technical Support

Support Topics We Can Help With:
1.Installation Assistance:

If you have questions or run into any difficulties during the installation process, our team is available to guide you step by step. We can help with troubleshooting or provide recommendations for improving your installation.

2.Product Issues or Defects:

If you notice any defects or issues with your PS Wall Panels after installation, contact us with photos and your proof of purchase. We’ll review your case and assist with returns or replacements under warranty.

3.Panel Customization:

If you have specific size, color, or design requirements, we can help with customization options. Get in touch with our team to discuss your needs and find the best solution for your project.

4.Product Specifications:

Our team can provide detailed product specifications, including panel dimensions, weight, material properties, and installation guidelines. We also offer technical datasheets for further reference.

By following the above instructions and guidelines, you can ensure a smooth installation and long-lasting performance of your Akupanel Acoustic Panel, Interior WPC Wall Panel, SPC Flooring, UV Marble Sheet, PU Stone Panel, PS Wall Panels. If you encounter any issues or have further questions, feel free to reach out to our technical support team.

Contact Us

We will answer your email shortly!

Don’t want to be tied down? Click to send email directly enquiry@dongstardecor.com

Scroll to Top